Modular Cleanroom Solutions iconModular Cleanroom Solutions

HEPA Filtered Fan Units

  • HEPA Filtered Fan Units

    Key features include:

    • Powered by energy efficient EBM motors.
    • SAM units with EBM motors are compatible with our CRI SAMlink Control System.
    • Four seismic clips at all corners provide strong suspension points for meeting seismic requirements.
    • Solid-state variable speed control with RFI suppression allows each unit to be fine-tuned for room air flow requirements.
    • Most units are UL Listed with all electrical components UL Listed or UL Recognized.
    • Housings are fabricated from steel with a white powder coat finish, aluminum or stainless steel.
  • HEPA Filtered Fan Units

    An exterior view of HEPA fan filter units installed in a modular cleanroom.

  • HEPA Filtered Fan Units

    An exterior view of HEPA fan filter units installed in a modular cleanroom.

  • HEPA Filtered Fan Units

    Use a Reverse Flow Unit when Negative Pressure is Required.

    • Air is pulled out of a cleanroom, clean bench, workstation or an enclosure and passes through a HEPA filter.
    • The HEPA filter captures particles sized at 0.3 microns or larger.
    • Clean air can be ...
      • exhausted into the ambient area
      • ducted into a recirculation system
      • vented to the outside
  • HEPA Filtered Fan Units

    SAM Units Meet Your Most Exacting Cleanroom Specifications, keep reading below for more details regarding SAM Units.

  • HEPA Filtered Fan Units

    SAMlink Control Systems are designed to control SAM units from a remote console or panel. Linked individually or in groups, they allow the operator to increase or reduce airflow to a selected area, and utilize the set-back feature during off-peak hours, resulting in lower operating costs.

  • HEPA Filtered Fan Units

    SAMlink Control Systems are designed to control SAM units from a remote console or panel. Linked individually or in groups, they allow the operator to increase or reduce airflow to a selected area, and utilize the set-back feature during off-peak hours, resulting in lower operating costs.

HEPA Filtered Fan Units

Fan Filter Units meet your most exacting cleanroom requirements, with self-contained, motorized Supply Air Modules equipped with either HEPA or ULPA filters. With high quality energy efficiency, air-flow adaptability, and dependable construction.

SAM GS Units permit the removal of the HEPA or ULPA filters from roomside without removing the complete unit from the ceiling. GS Units feature an upstream gel channel on the final filter, which provides a leak-free seal between the filter and housing.

SAM NCR Style filters can be replaced when the complete unit is removed from the ceiling.

SAM MicroSound Units feature low noise levels and energy-efficient low-watt motors.

SAM MicroWatt Units feature ultra-low power consumption.

SAM Haz Loc Units feature electrical components that meet various Class and Division requirements for hazardous locations.

Features

  • Powered by energy-efficient EBM motors.
  • SAM units with EBM motors are compatible with our CRI SAMlink Control System.
  • Four seismic clips at all corners provide strong suspension points for meeting seismic requirements.
  • Solid-state variable speed control with RFI suppression allows each unit to be fine-tuned for room air-flow requirements.
  • Most units are UL Listed with all electrical components UL Listed or UL Recognized.
  • Housings are fabricated from steel with a white powder coat finish, aluminum or stainless steel.
Cleanroom Ceiling Components >

Proudly Serving Oregon, Washington, Idaho and British Columbia

Subscribe to our newsletter

Helpful resources and news on our latest solutions - what’s not to like?

©2016 Weaver Technologies. All Rights Reserved. | Privacy | Problems with this site? Contact our Webmaster (info[at]cardwellcreative[dot]com).